• 艦船模型・航空機模型などの完成品と製作過程
    シールズモデル 1/700 海上自衛隊 砕氷艦 しらせ(初代) プラモデル 完成品

    シールズモデル 1/700 南極観測船 しらせ(初代) プラモデル 完成品。エッチングパーツ付きのキットに付属のエッチングパーツでディテールアップしました。

    SEALSMODEL1/700 Antarctic observation ship Shirase (first generation) plastic model finished product. The details have been improved with the etching parts included in the kit with etching parts.

    Made in 2008

    実艦解説

    しらせ」は海上自衛隊の呼称では「砕氷艦」ですが、一般的に「南極観測船」と呼ばれる事が多いですので、南極観測船としました。

    「しらせ」は「宗谷」「ふじ」に続いて建造された日本の南極観測船の3代目です。1982年に就役し、25年の長きにわたり日本の南極観測を支えてきましたが、耐用年数を迎え、2007年11月に最後のご奉公として晴海ふ頭を出航しました。
    「しらせ」は退役後どうなってしまうのか、もし引き取り手が無ければスクラップになってしまうのではと危惧されていました。

    2021年4月7日追記

    この「しらせ」は2010年にウェザーニュース社が引き取りSHIRASEと名前を変えた上で船橋に係留されていたのですが、東日本大震災を機に一般財団法人WNI気象文化創造センターに所有権が移転されています

    SHIRASE https://shirase.info/

    “Shirase” is called “icebreaker” by the Maritime Self-Defense Force, but it is often called “Antarctic research ship”, so I chose it as an Antarctic research ship.

    “Shirase” is the third generation of the Japanese Antarctic research ship built following “Soya” and “Fuji”. She went into service in 1982 and has supported Japan’s Antarctic Expedition for 25 years, but at the end of her useful life, she departed Harumi Wharf in November 2007 as her last servant.
    She was worried about what would happen to her after her retirement, and if she didn’t have her taker, it would be scrapped.

    This “Shirase” was taken over by Weathernews Inc. in 2010 and was moored at Funabashi after changing its name to SHIRASE, but the ownership was transferred to the WNI Meteorological Culture Creation Center after the Great East Japan Earthquake. Is

    キット紹介

    シールズモデルのエッチングパーツ付きキットを使用しました。下のリンクは通常版です。

    I used a kit with etched parts of the SEALSMODEL . The link below is the regular version.

    製作・塗装

    船体側面にスジ彫りと舷側のモールドを追加、ヘリ甲板下などの支柱を追加しています。付属のエッチングパーツは手すり以外はほぼ使用しています。手すりは他社の3段手すりを使用しました。アンテナなどは真鍮線に置き換えています。ヘリ甲板のモールドは凸から凹に切り替えています。

     サフ+ブラックを下地に塗装を行いました。

    セールカラー セールカラー(Mrカラー)
    オレンジ   セールカラー→橙オレンジ(ガイアノーツ)
    甲板色    ニュートラルグレー4(ガイアノーツ)

    ジャーマングレー+ブラックでウォッシング後にデカールを貼り、ガイアノーツのつや消しクリアーを吹いてから、ウェザリングマスターで軽くウェザリング。最後にクレーンワイヤーや空中線を張っています。

    A streak carving and a mold on the side are added to the side of the hull, and columns such as under the helicopter deck are added. Most of the attached etched parts are used except for the handrail. For the handrail, we used a 3-stage handrail from another company. The antenna etc. are replaced with brass wire. The mold on the helicopter deck is switched from convex to concave.

    I painted the surfacer + black as the base.

    Sale color Sale color (Mr color)
    Orange sale color → orange orange (Gaia Notes)
    Deck color Neutral Gray 4 (Gaia Notes)

    After washing with German gray + black, apply decals, blow the matte clear of Gaia Notes, and then lightly weather with the weathering master. Finally, the crane wire and the antenna are stretched.

    完成品画像

    シールズモデル 1/700 海上自衛隊 砕氷艦 しらせ(初代) プラモデル 完成品
    シールズモデル 1/700 海上自衛隊 砕氷艦 しらせ(初代) プラモデル 完成品
    シールズモデル 1/700 海上自衛隊 砕氷艦 しらせ(初代) プラモデル 完成品
    シールズモデル 1/700 海上自衛隊 砕氷艦 しらせ(初代) プラモデル 完成品

    こちらの完成品もご覧ください

    投稿者プロフィール

    まいど! maido
    まいど! maido
    模型好き。カメラ好き。各模型雑誌で掲載多数。
    艦船模型、飛行機模型、AFV模型などプラモデル全般の制作代行も承っております。「お問い合わせ」からご連絡ください。(注)2022年10月現在多数のバックオーダーのためご新規での制作代行は半年以上先の納品となります。

    コメントを残す

    メールアドレスが公開されることはありません。 が付いている欄は必須項目です

    CAPTCHA