• 艦船模型・航空機模型などの完成品と製作過程
    ドラゴン 1/700 イギリス海軍VTOL空母 イラストリアス プラモデル 完成品

    ドラゴン 1/700 イギリス海軍VTOL空母 イラストリアス(改装後) プラモデル完成品

    2022年製作

    Dragon 1/700 Royal Navy VTOL aircraft carrier Illustrious (after refurbishment) plastic model finished product

    Made in 2022

    実艦解説

    1950年代~1960年代前半のイギリス空母は第二次大戦中竣工のイラストリアス級ヴィクトリアスやマジェスティック級などある程度の数の航空母艦を運用していました

    British aircraft carriers from the 1950s to the early 1960s operated a certain number of aircraft carriers, including the Illustrious-class Victorias and Majestic-class aircraft carriers completed during World War II.

    ヴィクトリアス Victorious

    その後イギリスは軍事予算を大幅に縮小、艦上戦闘機はファントムFG1を選定しました

    After that, Britain drastically reduced its military budget, and the carrier-capable fighter chose the Phantom FG1.

    このファントムFG1を搭載できたのはオーディシャス級航空母艦アークロイヤルのみとなりました。

    イギリスではVTOL機のハリアーが実用化されたこともあり、ハリアーを搭載する航空母艦としてインヴィンシブル級航空母艦が建造されました。

    インヴィンシブル級の2番艦がイラストリアスです。2003年にスキージャンプの角度の変更など改装を行い、2005年にはイギリス海軍の旗艦となりました。

    Only the Audacious-class aircraft carrier Ark Royal could carry this Phantom FG1.

    In the United Kingdom, the Harrier of the VTOL aircraft was put into practical use, and the Invincible-class aircraft carrier was built as an aircraft carrier equipped with the Harrier.

    The second invincible class ship is Illustrious. She refurbished in 2003, including changing the angle of the ski jump, and became the flagship of the Royal Navy in 2005.

    キット紹介

    製作塗装

    発売から既に30年近く経過しているキットで、2022年の基準では若干見劣りする部分もあります。

    各部のシャープ化、甲板白線のデカール化、手すりなど汎用エッチング使用のディテールアップ、ゴールキーパーCIWSの3Dプリンタパーツ化を行いました。

    船体をカットの上でプラ板を貼りウォーターライン仕様に変更しました。内部にケース固定用のナットを取り付けていたのですが、ポリパテの硬化不良の方向転換処理などに伴い外れてしまったので、プランBのタッピングビス固定に変更しました。

    搭載機はキット付属のFG7/9以外にオレンジホビーのシーハリアーFRS1の機首を少し太らせてFA2として搭載しました。

    It’s been almost 30 years since its release, and there are some parts that are slightly inferior to the 2022 standard.

    Sharpening of each part, decaling of the white line on the deck, detail improvement using general-purpose etching such as handrails, and replacing the goalkeeper CIWS with 3D printer parts.

    I changed the hull to waterline specifications by pasting a plastic plate on the cut. I had installed a nut for fixing the case inside, but it came off due to the direction change processing of the poly putty due to poor curing, so I changed to fixing the tapping screw of Plan B.

    In addition to the FG7 / 9 included in the kit, the orange hobby Sea Harrier FRS1 was mounted as FA2 with a slightly thicker nose.

    完成品画像

    ドラゴン 1/700 イギリス海軍VTOL空母 イラストリアス プラモデル 完成品
    ドラゴン 1/700 イギリス海軍VTOL空母 イラストリアス プラモデル 完成品
    ドラゴン 1/700 イギリス海軍VTOL空母 イラストリアス プラモデル 完成品
    ドラゴン 1/700 イギリス海軍VTOL空母 イラストリアス プラモデル 完成品
    ドラゴン 1/700 イギリス海軍VTOL空母 イラストリアス プラモデル 完成品
    ドラゴン 1/700 イギリス海軍VTOL空母 イラストリアス プラモデル 完成品
    ドラゴン 1/700 イギリス海軍VTOL空母 イラストリアス プラモデル 完成品
    ドラゴン 1/700 イギリス海軍VTOL空母 イラストリアス プラモデル 完成品
    ドラゴン 1/700 イギリス海軍VTOL空母 イラストリアス プラモデル 完成品

    投稿者プロフィール

    まいど! maido
    まいど! maido
    模型好き。カメラ好き。各模型雑誌で掲載多数。
    艦船模型、飛行機模型、AFV模型などプラモデル全般の制作代行も承っております。「お問い合わせ」からご連絡ください。(注)2022年10月現在多数のバックオーダーのためご新規での制作代行は半年以上先の納品となります。

    コメントを残す

    メールアドレスが公開されることはありません。 が付いている欄は必須項目です

    CAPTCHA